Tools:
- Philips Head Screwdriver
Difficulty: 
Parts Involved: 
Directions:
This project was probably the easiest to do, it only took me an fifteen minutes and I was in no rush. The first thing you need to do is remove the two screws that were holding the shattered part of the old lamp in. Here is a picture of the lamp screws.
The lamp screws: 
After the screws are removed place the lamp in the whole and use the screws you removed to attached the new lamp in place. Then take the light connector and attach it into the lamp. The final product is in the picture below:
The final product: 
If everything tests out alright, congratulations, if it doesn’t shoot me an email or something with a question or go over to Trans Am Country and join up with the great group of guys who I am learning from in the forums. The installation of everything else is the reverse of taking it off. There is no real finished product pictures as it is just the door lock, and its kind of boring, but normally these guides do include finished products.
